Incorporation of graphene oxide nanosheets into boronate‐functionalized polymeric monolith to enhance the electrochromatographic separation of small molecules

Graphene oxide (GO) nanosheets were incorporated into an organic polymer monolith containing 3‐acrylamidophenylboronic acid (AAPBA) and pentaerythritol triacrylate (PETA) to form a novel monolithic stationary phase for CEC. The effects of the mass ratio of AAPBA/PETA, the amount of GO, and the volume of porogen on the morphology, permeability and pore properties of the prepared poly(AAPBA‐GO‐PETA) monoliths were investigated. A series of test compounds including amides, alkylbenzenes, polycyclic aromatics, phenols, and anilines were used to evaluate and compare the separation performances of the poly(AAPBA‐GO‐PETA) and the parent poly(AAPBA‐co‐PETA) monoliths. The results indicated that incorporation of GO into monolithic column exhibited much higher resolutions (>1.5) and column efficiency (62 000 ～ 110 000 plates/m for toluene, DMF, formamide, and thiourea) than the poly(AAPBA‐co‐PETA). The successful application in isocratic separation of peptides suggests the potential of the GO incorporated monolithic column in complex sample analysis. In addition, the reproducibility and stability of the prepared poly(AAPBA‐GO‐PETA) monolith was assessed. The run‐to‐run, column‐to‐column and batch‐to‐batch reproducibilities of this monolith for alkylbenzenes’ retention were satisfactory with the RSDs less than 1.8% (n = 5), 3.7% and 5.6% (n = 3), respectively, indicating the effectiveness and practicability of the proposed method.     

基于石墨烯的毒死蜱分子印迹电化学传感器的制备及对毒死蜱的测定

利用分子印迹技术,以马来松香丙烯酸乙二醇酯为交联剂,使用自由基热聚合法在石墨烯修饰的玻碳电极表面合成毒死蜱( CPF)分子印迹聚合膜,制得了CPF分子印迹电化学传感器。采用循环伏安法、线性扫描伏安法和电化学交流阻抗法等,考察了此CPF分子印迹膜的电化学性能。在最佳检测条件下,传感器的峰电流与CPF浓度在2.0×10-7~1.0×10-5mol/L范围内呈线性关系,线性方程为Ip(μA)=-7.1834-0.2424C (μmol/L),相关系数r2=0.9959,检出限为6.7×10-8 mol/L(S/N=3)。构建了CPF分子印迹电化学传感器的动力学吸附模型,测得印迹传感器的印迹因子β=2.59,结合速率常数k=12.2324 s。传感器表现出良好的重现性和稳定性,并成功用于实际水样和蔬菜样品中CPF的测定,加标回收率为94.1%~101.4%。     

g-C3N4/rGO杂化催化剂的简易合成及其对罗丹明B的光催化降解作用

在空气中直接加热三聚氰胺和氧化石墨烯(GO)的混合物制备了g-C3N4/rGO杂化催化剂.实验结果表明,混合物中的g-C3N4保留了石墨型氮化碳原始的特征结构, g-C3N4和还原的氧化石墨烯(rGO)之间的异质结主要通过π-π作用构筑.当原料中三聚氰胺/GO的质量比是800/1时,所得催化剂对罗丹明B的催化作用最强,其一阶动力学常数是纯g-C3N4的2.6倍.这种强化作用主要是由于rGO促进了光生电子-空穴对的分离.此外, g-C3N4/rGO还表现出显著的pH值敏感特性,催化降解速率随pH的降低而增加.当pH =1.98时,其一阶动力学常数是纯g-C3N4的8.6倍.这是由于酸性条件下质子(H+)消耗掉光生电子,促进了空穴对罗丹明B的氧化作用,其中rGO充当了一个快速的光生电子转移平台.     

石墨烯衍生物负载的纳米催化剂用于氧还原反应

综述了用于燃料电池中氧还原反应(ORR)的石墨烯衍生物负载的各种纳米催化剂的最新进展。介绍了用于表征石墨烯基电催化剂的常规电化学技术以及石墨烯基电催化剂最新的研究进展。负载于还原氧化石墨烯(RGO)上的Pt催化剂的电化学活性和稳定性均得到显著提高。其它贵金属催化剂,如Pd, Au和Ag也表现出较高的催化活性。当以RGO或少层石墨烯为载体时, Pd催化剂的稳定性提高。讨论了氧化石墨烯负载Au或Ag催化剂的合成方法。另外,以N4螯合络合物形式存在的非贵过渡金属可降低氧的电化学性能。 Fe和Co是可替代的廉价ORR催化剂。在大多数情况下,这些催化剂稳定性和耐受性的问题均可得到解决,但其整体性能还很难超越Pt/C催化剂。     

Poly(vinyl alcohol)/GO-MMT nanocomposites: Preparation,structure and properties

A facile, efficient and environment friendly method is established to prepare poly(vinyl alcohol)(PVA) based graphene oxide-montmorillonite(GO-MMT) nanocomposites in aqueous media. GO-MMT nanohybrid is obtained by the combination of GO and MMT in water without any reducing or stabilizing agents. The formation of GO-MMT nanohybrid is due to the hydrogen bonding and crosslinking effects. The sodium ions within MMT sheets act as crosslinkers between GO sheets and MMT platelets. The resultant nanocomposites are characterized by means of X-ray diffraction(XRD), scanning electron microscopy(SEM), differential scanning calorimetry(DSC), thermogravimetric analysis(TGA) and mechanical testing. Compared to that of pure PVA, PVA nanocomposites show enhanced thermal stabilities and mechanical properties, which results from strong interfacial adhesion of the nanoadditives in PVA matrix. The further increase in the tensile strength and modulus results from strong interaction between PVA chains and layered GO-MMT as well as good mechanical properties of GO-MMT hybrid, compared to PVA/GO and PVA/MMT nanocompsoites.     

石墨烯非共价功能化及其应用

石墨烯的湿法化学修饰,主要包括共价及非共价两种,是目前广泛采用的宏量功能化策略,亦是有效避免其团聚而充分发挥其优异纳米性能的重要修饰方法。非共价功能化因可同时保持原有及引入物质的物化性质,并可充分发挥协同作用,近年来已受到比共价修饰更多的研究关注,并已在生物科学与技术、可持续能源储存及转化、医疗和复合材料等诸多领域得到了广泛应用。本文综述了以应用为导向的石墨烯非共价功能化的构建策略,期望文中涉及的湿法组装策略能为进一步构建性能提升的新材料提供参考。     

还原氧化石墨烯修饰Bi2WO6提高其在可见光下的光催化性能

通过两步水热法合成了一种新型的还原氧化石墨烯(RGO)修饰的Bi₂WO₆(Bi₂WO₆-RGO), 结果表明其在可见光下的光催化性能得到了显著的提高. 研究了RGO在Bi₂WO₆-RGO中的含量对其光催化性能的影响, 从而确定出RGO相对于Bi₂WO₆的最佳掺杂质量比值为1%. 通过扫描电镜(SEM)研究发现, RGO并没有改变Bi₂WO₆光催化剂的结构和形貌. Bi₂WO₆-RGO在可见光下的光催化性能得以提高可以归功于RGO. 其可能的机理是石墨烯的存在有利于光生载流子(激子)的分离, 从而导致产生更多的O₂^·-用于有机染料污染物(如罗丹明B (RhB))的降解. RhB分子在石墨烯上的有效吸附可能也是导致Bi₂WO₆-RGO光催化性能提高的另一原因.     

氧化石墨烯增容尼龙6/聚苯乙烯共混体系的研究

氧化石墨烯(GO)亲水性的边缘和疏水性的中间片层使其具有两亲特性.利用GO的这种特性,将其加入尼龙6(PA6)/聚苯乙烯(PS)的共混体系,以提高PA6和PS的相容性.通过两步法制备了PA6/PS/GO共混物,研究了GO对PA6/PS共混材料结构形态与力学性能的影响,并对其增容机理进行了探讨.扫描电镜(SEM)结果表明,添加GO后,共混材料的分散相尺寸明显变小,分散更为均匀,少量的GO即可达到良好的增容效果.动态力学性能(DMA)测试进一步证明了GO对PA6/PS共混物具有一定的增容性.理论计算也表明PS/GO共混物和PA6具有更接近的表面自由能和较低的界面自由能.添加GO后共混物材料的拉伸性能和韧性明显提高.GO添加量为0.1 wt％时,共混材料的断裂伸长率较未添加GO的共混材料提高了170％,断裂能也提高了近240％.     

氧化石墨烯基异丙隆分子印迹聚合物的制备及其吸附性能研究

以氧化石墨烯为载体,异丙隆为模板分子,采用表面印迹技术制备了分子印迹聚合物。采用透射电子显微镜、拉曼光谱和热重分析仪对该分子印迹聚合物的结构进行了表征,并通过动态平衡结合法研究了该分子印迹聚合物的吸附能力。结果表明:准二级动力学模型很好地拟合了吸附动力学,相关系数(R2)为0.999 7;与非分子印迹聚合物相比,制备的印迹材料表现出高吸附效率和快速的吸附动力学;选择性吸附试验表明该分子印迹聚合物对异丙隆具有选择性和特异性吸附。     

Graphene Nanoribbons from Tetraphenylethene‐Based Polymeric Precursor: Chemical Synthesis and Application in Thin‐Film Field‐Effect Transistor

Graphene nanoribbons (GNRs) with a non‐zero bandgap are regarded as a promising candidate for the fabrication of electronic devices. In this study, large‐scale solution synthesis of narrow GNRs was firstly achieved by the intramolecular cyclodehydrogenation of kinked tetraphenylethene (TPE) polymer precursors prepared by A₂B₂‐type Suzuki‐Miyaura polymerization. After the cyclization reaction, the nanoribbons have a better conjugation than the twisted polymer precursor, resulting in obvious red shift in UV/vis absorption and photoluminescence (PL) spectra. The efficient formation of conjugated nanoribbons was also investigated by Raman, FTIR spectroscopy, and microscopic studies. Furthermore, such structurally well‐defined GNRs have been successfully developed for top‐gated field‐effect transistor (FET) by directly solution processing. The AFM images show that the prepared‐GNRs thin films form crystalline fibrillar intercalating networks, which can effectively facilitate the charge transport. These FET devices with ion‐gel gate dielectrics exhibit low‐voltage operation (<5 V) with excellent mobility up to 0.41 cm²·V^?1·s^?1 and an on‐off ratio of 3×10⁴, thus opening up new opportunities for flexible GNRs‐based electronic devices.